Conical Twin Screw Extruder performanceThe ASZ series is equipment that can directly manufacture pipes, plates, bars, films, hollows, and irregular shapes from powder.It is also a high-energy extruder with a wide range of mixing

 

Co-rotating parallel twin screw extruder The AST series uses an element type screw, and depending on the raw material and processing flow, the L/D barrel structure, screw structure, screen changer, number of vents, loader method, electrical control, etc. can be optimally arranged. Suitable for processing polymer materials. The latest type of gearbox provides the world's highest torque.

 

High Speed ​​Twin Screw Extruder The ASTH series has an element type screw, and it is possible to optimally arrange the L/D barrel structure, screw configuration, screen changer, number of vents, loader method, electrical control, et

 

Single Screw Extruder Suitable for thermoplastic resins such as soft PVC and hard PVC. By combining a sub-extruder and a die, various products can be produced. For example, films, pipes, rods, plates, threads, bands, cables, cable insulation, and hollow products. Granulation is also possible. Performance This machine has an advanced design that achieves high output, good plasticization, and energy saving. It also has a sturdy gearbox, low noise, stable operation, and long life.

 

Conical twin screw and barrel IndicationsPVC, Profiles, Pipes, Granulation, WPCPerformanceφ35~φ92SACM645 nitriding treatment, hardness>850, depth 0.5-0.9mm, the front end of the barrel and the screw can be sprayed with cemented

 

Parallel twin screw and barrel ApplicationSuitable for the production of PVC foam products, profiles, pipes, pellets, and WPC (Wood Plastic Composite) materials.Specifications & FeaturesScrew diameter: φ35–φ250L/D ratio: 16–36M

 

Single Screw & Cylinder Applicable Materials: Various plastics, food, chemical products manufacturing

 

Twin Screw Extruder Barrel Barrel Technology – Over 20 Years of ExpertiseWe have been developing and manufacturing extruder barrels for over two decades. Our barrel systems are now mature and widely used in twin-screw extruders

 

Element ​Screw Elements Outer Diameter: φ25 – φ400 mm Connection Types: Keyed, Hexagonal Spline, Internal Hexagon, Involute Spline Structure: The screw consists of a central shaft and hollow screw elements. Key Features: By replacing certain screw elements, the system can be adapted to extrude different materials. Kneading segments and movable segments can be easily installed or replaced. A single screw shaft can be configured to process a wide variety of materials

 

Chipple cutter Chipless Cutter for Plastic Profile ExtrusionOur chipless cutting machine is specifically designed for clean and efficient cutting of plastic profiles such as PVC, PE, PP, and more. The chipless desi

 

Underwater cutting and granulating line Underwater cutting and granulating line

 

Plastic Sheet Extrusion Line MF Series Sheet Extrusion Line

 

Extrusion Machine Line for PE Pipe PE / PPR Pipe Extrusion Line

 

Co-rotating Conical Twin Screw Extruder The co-rotating conical twin screw extruder has high output, low wear, good mixing and plasticizing effect, and can use a high proportion of filler or recycled materials. It can also reduce electricity by more than 50%, output 2-3 times, and add a high proportion of filler or recycled materials at the same time. It has very high cost performance, greatly reducing manufacturing costs, reducing labor costs and saving space. Applications: The co-rotating conical twin screw extruder has high output, very low wear, good mixing and plasticizing effect, and can add a high proportion of filler.

 

Parallel Counter-Rotating Twin-Screw Extruder Parallel Counter-Rotating Twin-Screw Extruder

 

Sub-extruder Small co-extrusion extruders are mainly used for color strips, adhesives, small-volume extrusion, etc. during the extrusion process.

 

Screw barrel for rubber Application: Rubber Specifications / Performance: Diameter: φ50~φ500mm L/D ratio: 8~20 Nitriding depth: 0.4~0.7mm Surface hardness: Hv900~1060 (HRC56°~65°)

 

Twin-Screw Shaft According to different customer needs, we offer: Traditional spline-milled shafts Cold-rolled spline shafts

 

Plastic Profile Extrusion Line Our plastic profile extrusion line is designed for the production of precision and durable profiles used in window frames, door frames, cable ducts, construction parts, and more. We offer a complete turnkey solution including single or twin screw extruder, vacuum calibration table, haul-off unit, cutter, and stacker.

 

Vacuum Cooling Trough Our Vacuum Cooling Trough is designed for efficient cooling and dimension stabilization of plastic profiles after extrusion. The integrated vacuum system ensures high surface quality and precise shaping of the final product.

 

Chipless Cutter for Plastic Pipes Our chipless cutting machine is designed for inline cutting of plastic pipes such as PVC, PE, PP, and PPR, providing clean and burr-free cuts with high-speed operation.

 

Plastic Siding Production Line Our plastic siding production line is specially designed for producing high-quality exterior cladding using materials such as PVC, ASA, and PMMA. These sidings offer excellent aesthetics, weather resistance, and durability.

 

PVC Pipe Extrusion Line his multifunctional PVC pipe extrusion line is designed for the production of various UPVC pipes, including foam-core pipes, inner spiral foam pipes, and hollow-wall spiral pipes. Large-diameter UPVC pipes are suitable for water supply and drainage systems. Small-diameter pipes can be extruded with dual or triple outlets from a single extruder.

 

Haul-off Machine The haul-off machine is a key downstream unit in plastic extrusion lines, designed to steadily pull profiles or pipes made from PVC, PE, PP and other thermoplastics.

 

Cooling Tank Our cooling tank is designed for plastic pipe extrusion lines, providing both precise sizing and efficient cooling during production.

 

Saw Blade Cutting Machine This saw blade cutting machine is designed for plastic pipe extrusion lines (PVC, PE, PP). It supports two cutting methods depending on the pipe size.

 

Pipe Haul-off Machine Our pipe haul-off machine is specially designed for plastic pipe extrusion lines including PVC, PE, and PP. It ensures stable traction for pipes of various diameters and wall thicknesses.

 

Two-Stage Pelletizing Extruder Our two-stage pelletizing system consists of an upper co-rotating twin-screw extruder and a lower single-screw extruder, designed to efficiently handle complex compounding and precise pelletizing.

 

Vacuum Loader The vacuum loader is an automatic feeding system designed to convey plastic pellets or powder from silos or hoppers to extruders, dryers, or processing machines. It ensures clean, efficient, and automated material transport.

 

Profile Extrusion Die The profile extrusion die is used for continuous extrusion of plastic profiles such as window frames, door frames, cable ducts, building materials, and furniture components. It ensures high dimensional accuracy and stable extrusion performance.

 

Plastic Material Dryer This dryer is designed for the efficient dehumidification and drying of hygroscopic plastic materials before molding. It removes moisture from the resin to improve product quality, strength, and transparency.

 

Pipe Extrusion Die Pipe extrusion dies are used to manufacture pipes from PVC, PE, PP, and other polymers, ensuring uniform extrusion and precise outer diameter control. Depending on the pipe type and application, different die structures are available.

 

Screen Changer A screen changer is a vital component in extrusion lines, used to filter out impurities and contaminants from molten polymers. It ensures consistent extrusion pressure and enhances product quality.

 

Gear Pump Gear pumps are essential components in polymer extrusion lines, used to precisely deliver molten polymers from extruders or kneaders to downstream equipment like dies or pelletizers with stable pressure and flow.

 

Shredder A plastic shredder or crusher is used to break down waste plastics, runners, or defective products into smaller granules suitable for recycling or reprocessing.

 

Industrial Chiller Industrial chillers are used in plastic molding and extrusion processes to cool molds and products, ensuring stable production and improved product quality.

 

Gravimetric Blender A gravimetric blender is designed to accurately weigh and mix multiple raw materials (resins, additives, colorants, etc.) based on set recipes. It ensures precise and repeatable batching, improving consistency and product quality.

 

Vibrating Screen The vibrating screen is a classification device used for removing impurities, grading, and shaping plastic pellets or powders. It uses controlled vibration to separate materials efficiently.

 

WPC Die Head The WPC extrusion die is specially designed for extruding wood-plastic composite (WPC) profiles, which are made by mixing wood powder and thermoplastic resin. It is ideal for decking, cladding, fencing, and construction applications.

 

Gearbox Repair１ We specialize in repairing and maintaining European gearboxes used in extrusion machinery. Supported brands include: Zambello, Flender, Stoeckel, Reinhardt, Bauer, Henschel, Sauer, and others.

 

Gearbox Repair２ We specialize in repairing and maintaining European gearboxes used in extrusion machinery. Supported brands include: Zambello, Flender, Stoeckel, Reinhardt, Bauer, Henschel, Sauer, and others.

 

Reverse Engineering & Measurement Services We offer precision measurement and technical drawing services based on existing parts, including reverse engineering of imported or old components with no available documentation.

 

Screw & Barrel Replacement Service We provide professional screw and barrel replacement and refurbishment services for extruders and injection molding machines.

 

Maintenance & Repair Services We provide maintenance and servicing for various extrusion equipment (manufactured in Europe, Japan, Taiwan, and China), including replacement of parts such as barrels and screws, as well as electrica

 

European Gearbox Repair European Gearbox Repair & Maintenance Services

 

Strand Pelletizing Line The Strand Pelletizing Line is designed for extruding, cooling, and pelletizing thermoplastic materials such as PE, PP, ABS, PA, TPU, and PET. It offers a cost-effective and flexible solution for general-purpose granule production.

 

Plastic Recycling Pelletizing Line The recycling pelletizing line transforms post-consumer or post-industrial plastic waste (film, bottles, pipes, fabrics, etc.) into high-quality recycled pellets through shredding, washing, drying, melting, extruding, and pelletizing.

 

3D Printer Filament Production Line This production line is designed for continuous extrusion, cooling, and winding of high-precision 3D printing filaments using thermoplastic materials such as PLA, ABS, PETG, TPU, etc. Diameter tolerance can be controlled within ±0.02mm.

 

Types of Pelletizing Systems Types of Pelletizing Systems

 

Calender Rolls Calender Rolls for Sheet Extrusion Line